dhara | धरा

Don’t worry this can be a simple power connection issue. Try these steps in order:

Check the cable connection (most common fix).

• Make sure the USB Type-C cable is firmly plugged into the Smart Planter. Sometimes
  Type-C can look connected even when it isn’t fully seated.
• Check the wall socket / outlet.
  Plug the adapter into a different wall socket to confirm the outlet is working.
• Try a different 5V USB Type-C adapter. Use another known working 5V USB Type-C adapter to rule out a faulty power adapter.

If the Smart Planter still doesn’t power on after these checks, please contact Plant1 Customer Support for further assistance.

The substrate should feel lightly moist over timebut not soaked. If it feels consistently dry, it usually means the water isn’t reaching the root zone as expected, or the plant needs a more frequent watering rhythm. The most common reasons are:

• Low water level in the reservoir
  If thewater in thereservoir is low,itmay not have enough water to complete its normal
  hydration cycles.
• Orbit Basket is not seated properly (misalignment) The Orbit Basket needs to sit correctly so water can reach the plant’s roots evenly. If it’s
  slightly misaligned or not inserted fully, the water path can be interruptedleading to a drier substrate even when there’s water in the reservoir.
• Mineral deposits or debris affecting water flow Over time, minerals from water or small debris can build up and reduce water movement. If the water flow is partially blocked, the substrate can stay drier than normal.
• Your plant needs a more frequent watering cycle If the reservoir level is fine, the basket is aligned, and there’s no visible blockagebut your substrate still dries quicklyyour plant may simply prefer more frequent hydration
  (common with herbs, leafy greens, and thirstier indoor plants). In that case, switch to a more frequent watering mode and observe for a few days.

Lift the Orbit Basket out gently and check if anything is blocking it from sitting flat.

• Align it with the reservoir grooves/slots and lower it back in slowly.
• Make sure it’s fully seated and stable it shouldn’t wobble or sit at an angle.
• Once placed correctly, let Dharā run its next cycle and check the substrate after a while. A misaligned basket can interrupt the water path, so the root zone may stay drier even when the reservoir has water.

If you notice any buildupnear the pump, it can reduce water flow and make the substrate feel drier. Here’s what to do:

• Unplugthe devicefor safety.
• Remove the Orbit Basket and inspect the reservoir and pump area for visible deposits or debris.
• Drain the reservoir and rinse it with clean water toflushoutanyloose particles.
• Gently clean around the pump area and remove any visible buildup.
• Refill with clean water, reinsert the Orbit Basket properly, and run the next cycle.

Cleaning the reservoir and pump area helps restore normal flow inthe Smart Planter’sclosed- loop system. If the issue continues after cleaning, reach out to Plant 1CustomerSupport.

A red light with a buzzer sound means the water level in thereservoiris low and the Smart Planter needs a water refill. To restore normal auto-watering:

• Refill the reservoir with clean water up to the recommended level.
• Ensure the Orbit Basket is seated properly after refilling.
• Once refilled, the alert should stop and the device will continue its watering cycles.

A yellow light with a long buzzer about every 30 seconds signals an issue that needs technical help. Contact Plant1 Care Support for guided troubleshooting.

OxyFlow™is Plant1’s patented technology which is inspired by how moving water naturally re- oxygenates. In each cycle, water rises to hydrate the root zone (and carry nutrients when used), then recedes back into the reservoir; helping maintain a healthier balanceof moisture and air around roots instead of constant soaking.

Dharā–the Smart Planter can run up to 30 days of auto-watering without refills. The exact refill interval will vary based on plant type and size, indoor temperature and airflow (AC vs non-AC), light levels, and the watering mode you select (more frequentmodes typically use water faster
than less frequent ones).

Yes. Dharā–the Smart Planter requires electricity to run its auto watering cycles. It connects via 5VUSB Type-C powerand for consistent operation, keep it connected tothepower as instructedin the user manual

Dharā-theSmart Planteris designed for quiet indoor spaces, with noise levelthat’s practically “Zero.”Its silent operation blends seamlessly into your home, adding greenery with comforting aesthetics without disturbing your space.

Choose based on your plant type and how quickly moisture dries in your space (heat, light,
humidity, airflow). Each mode matches a different need:

• Rain Rush (Every 3 Hours):Best for thirstier plantsmanyforherbs, leafy greens, and plants that prefer consistently moist conditions.
• Morning Dew (Every 6 Hours):Frequent hydration, slightly gentler than Rain Rush,good for plants that like regular moisture without the most frequent cycle.
• Canopy Calm (Every 12 Hours):Balanced everyday mode for many indoor plants,ideal when your plant prefers steadier moisture or your home is warmer/brighter or has more airflow (plants drink faster).
• Mountain Mist (Every 24 Hours):Calmer rhythm with slightly drier intervals,better when your space is cooler/more humid or lower-light (plants drink slower).
• Desert Still (Every 48 Hours):Minimal watering forsucculents and cactiand other low- water plants. If you’re unsure, start withCanopy Calm (Every 12 Hours)and adjust after a few days based on how your plant responds.

Smart alerts are Dharā’s built-in LED + audio reminders that help you staymaintain your plants without daily monitoring. When the water level is adequate, Dharā shows a blue glow. When the water level is low, it switches to a red glow and plays a beep every 30 seconds to remind you to
refill.